Altistart 01 soft starter for asynchronous motor - ATS01 - 6 A - 380..415V - 1.5..3 KW - ATS01N206QN
This product is part of the Modicon TM3 range, an offer of expansion I/O modules for Modicon M221, M241, M251 and M262.
The analogue output module provides 2 outputs with 11bit + sign and 12bit resolution.
It is an output module with a rated supply voltage of 24V DC and a current consumption of 70mA at 24V DC via external supply full load.
This product is capable of controlling variable speed drives or any device equipped with a current or voltage input.
There is an insulation between output and supply at 1500V AC, output and internal logic at 500V AC.
It is furnished with removable screw terminal for electrical connection with 5.08mm pitch adjustment for outputs.
It is an IP20 rated product.
Its dimensions are 23.6mm (Width) x 70mm (Depth) x 90mm (Height).
It weighs 0.115kg.
This product is certified by CE.
It meets EN/IEC 61131-2 and EN/IEC 61010-2-201 standards.
This module is compatible with Modicon M262, Modicon M241, Modicon M251 and Modicon M221 logic controller.
It supports top hat type TH35-15, top hat type TH35-7.5 rail conforming to IEC 60715 and plate or panel with fixing kit mount.
Modicon TM3 expansion modules have been designed with a simple interlocking assembly mechanism.
A bus expansion connector is used to distribute data and the power supply when assembling the Modicon TM3 modules with logic controllers.
Boost the performance of your controller with the Modicon TM3 I/O system specially designed for the Modicon M221, M241 and M251 logic controllers.
| Attribute | Value |
|---|---|
| SKU | ATS01N206QN |
| product certifications | CCC, GOST, CSA, UL, C-Tick, B44.1-96/ASME A17.5 for starter wired to the motor delta terminal |
| relative humidity | 5-95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 |
| ambient air temperature for storage | -25-70 °C conforming to EN/IEC 60947-4-2 |
| pollution degree | 2 conforming to EN/IEC 60947-4-2 |
| ambient air temperature for operation | -10-40 °C (without derating), 40-50 °C (with current derating of 2 % per °C) |
| starting torque | 30...80 % of starting torque of motor connected directly on the line supply |
| deceleration time symb | adjustable from 1 to 10 s |
| discrete output voltage | 24 V (voltage limits: 6...30 V) open collector logic |
| output voltage | <= power supply voltage |
| range of product | Altistart 01 |
| operating position | vertical +/- 10 degree |
| product or component type | Soft Starter & Variable Speed Drive |
| current consumption | 30 A at nominal load |
| net weight | 0.42 kg |
| standards | EN/IEC 60947-4-2 |
| device short name | ATS01 |
| range | Altivar Softstarter ATS01 |
| [Uc] control circuit voltage | built into the starter |
| minimum switching current | 10 mA at 6 V DC for relay outputs |
| power range | 2.2-3 kW at 380-440 V 3 phases, 1.1-2 kW at 380-440 V 3 phases |
| motor starter type | soft starter |
| [Us] rated supply voltage | 380...415 V - 10...10 % |
| electromagnetic compatibility | damped oscillating waves level 3 conforming to IEC 61000-4-12, electrostatic discharge level 3 conforming to IEC 61000-4-2, immunity to electrical transients level 4 conforming to IEC 61000-4-4, immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3, voltage/current impulse level 3 conforming to IEC 61000-4-5, conducted and radiated emissions level B conforming to IEC 60947-4-2, conducted and radiated emissions level B conforming to CISPR 11, micro-cuts and voltage fluctuation conforming to IEC 61000-4-11, EMC immunity conforming to EN 50082-1, EMC immunity conforming to EN 50082-2, harmonics conforming to IEC 1000-3-2, harmonics conforming to IEC 1000-3-4, immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6 |
| electrical connection | 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit, screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit, screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit, 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit, screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit, screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit, 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit, screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit, 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit, 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit |
| IcL starter rating | 6 A |
| discrete output type | open collector logic LO1 end of starting signal, relay outputs R1A, R1C NO |
| discrete output current | 2 A DC-13, 3 A AC-15 |
| network frequency | 47.5...63 Hz |
| height | 124 mm |
| power dissipation in W | 4 W at full load and at end of starting, 64 W in transient state |
| compatibility code | ATS01N2 |
| marking | CE |
| width | 45 mm |
| depth | 131 mm |
| vibration resistance | 1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6, 1.5 mm peak to peak (f= 3-13 Hz) conforming to EN/IEC 60068-2-6 |
| operating altitude | <= 1000 m without derating, > 1000 m with current derating of 2.2 % per additional 100 m |
| IP degree of protection | IP20 |
| tightening torque | 0.5-0.5 N.m, 1.9-2.5 N.m |
| product destination | asynchronous motors |
| utilisation category | AC-53B conforming to EN/IEC 60947-4-2 |
| motor power kW | 3 kW, 3 phases at 380...415 V, 1.5 kW, 3 phases at 380...415 V, 2.2 kW, 3 phases at 380...415 V |
| display type | 1 LED (green) for starter powered up, 1 LED (yellow) for nominal voltage reached |
| supply frequency | 50...60 Hz - 5...5 % |
| shock resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| function available | integrated bypass |
| network number of phases | 3 phases |
| supply voltage limits | 342-456 V |
| product specific application | simple machine |
| maximum switching current | relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load, relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load |
| discrete input voltage | 24...40 V |
| type of start | start with voltage ramp |
| discrete input type | logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm |
| assembly style | with heat sink |
| discrete input logic | positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA |
| starting time | 1 s / 100, 5 s / 20, adjustable from 1 to 10 s, 10 s / 10 |